TCP/IP Configuration Manual
TCP/IP Configuration Manual
Step:
1) Configure the topology as diagram below. Rename each device whenever you want.
2) Below is two diagram that have different places. PC1 is for Home Connection, Server is from OpenLearning Campus. There are two servers for Campus, Web Server and DNS Server.
| Diagram 2: Home Connection |
| Diagram 3: Campus connection |
3) Double-click on PC 1, click Desktop tab, then click IP Configuration.
Change the IPv4 address and DNS Server and diagram below. Then, close the Tabs.
![]() |
| Diagram 4: PC1 IP configuration |
4) Now, double-click on Web Server. Click Desktop > IP Configuration. Choose Static, then configured IPv4 as shown diagram below.
![]() |
| Diagram 5: IP Configuration tab |
![]() |
| Diagram 6: IP config for Web Server |
5) After that, select Service > HTTP. On HTTP interface, click (edit) for index.html. Configured how you want website to display. Diagram 8 is the example.
![]() |
| Diagram 7: Website display configuration |
![]() |
| Diagram 8: Inside index.html |
6) Next, double-click DNS Server > Services > DNS.
1. Enable DNS Services.
2. Name the website domain to "openlearning".
3. Write IP address that same as Web Server.
4. Click Add.
![]() |
| Diagram 9: DNS Server services configuration |
7) Click Desktop > IP Configuration. Configured IPv4 address same as diagram below. DNS is same as DNS Server IPv4 address. Then, close the tabs.
![]() |
| Diagram 10: IP config for DNS Server |
8) For final configuration, double-click Cloud, click Config > DSL.
There are From Port (Left) and To Port (Right), choose Modem4 --> Ethernet and click add
![]() |
| Diagram 11: Cloud configuration |
9) Finally, for the website test. Go to PC1 > Desktop > Web Browser
![]() |
| Diagram 12: Web Browser for PC1 |
10) Write the domain we written before at Web Server configuration. In the example, I will write "openlearning", and it suppose to appear "Hi Openlearning" as diagram below
![]() |
| Diagram 13: Final result |
11) If Web Browser appear as same as we configured as Steps 5. Which mean TCP/IP Configuration is success










Comments
Post a Comment